Step 1: To adjust the size (circumference) of your Mantle Crossbody Leash start by removing the swivel snap from the large O-ring.

Step 2: Then slide one of the single locking slides away from the large O-ring in the desired direction to make it larger or smaller around the body.

Step 3: Now move the one single locking slide and then move the large O-ring until it meets the single locking slide that was just moved.

Step 4: Then move the other single locking slide to meet the large O-ring. This locks the connection point in place.

Step 5: Now, you can reattach the leash end to the ring, which is now locked in place.

To further adjust the size of the Mantle Crossbody Leash simply reverse the steps.

Step 1: To adjust the Mantle Collar start by sliding the single locking slide away from it’s locked position. This allows for the collar to freely expand and contract in size.

Step 2: The circumference of the Mantle Collar can be reduced by moving both double adjustor slides away from one another. To expand the circumference move the double adjustor slides towards one another.

Step 3: Once your Mantle Collar is sized correctly and to reduce any slack, adjust the double adjuster slide so that collar cords are parallel.

Step 4: Once the slack is properly adjusted then slide the single locking side back up into position close to the double adjuster slide. The collar is now adjusted and in its locked position.

Step 5: To lock the collar in position, slide up the single locking slide back up under the double adjustor slide.

Important Step: It is very important that the single locking slide is in its locked position as it keeps the leash from expanding open with force.

User Tip: Some people prefer to set their dog’s collar pretty loose. In this case you might be able to slip the collar on an off of your dog without the need for resizing of the collar.

User Tip: It is sometimes easier to pre-adjust the collar off of you dog. Then make final adjustments once on you dogs neck.

To remove or adjust your Mantle Collar simply reverse the previous steps.

Step 1: To adjust your Mantle Step-in Harness start by sliding both single locking slides away from the double slides.

Step 2: Next slide each double adjust slide down to meet the single locking slides. This expands the harness allowing it to slip onto your dog.

Step 3: Now slip the large top loop of the harness over your dog's neck and put each paw through the lower loops.

Step 4: Lastly, evenly slide up each of the double adjustor slides on each side to size the harness to your dog.

Important Step: To lock the harness in position, slide up both single locking slides under the double adjustor slides.

Reverse the process to remove and or adjust your Mantle Step-in Harness.

Step 1: To attach the Mantle Leash Lead to the Mantle Handle start by taking the open loop end of the handle and slipping it through the o-ring at the top of the leash lead.

Step 2: Then slip the end of the leash lead with the swivel snap through the handle loop that was pushed through the single ring.

Step 3: Pull the leash lead all the way through to the end then pull the handle and leash lead snugly into place to secure the handle to the leash lead.

To remove or change the Mantle Handle simply reverse the process.

Step 1: To attach the Mantle Leash Lead to the Mantle Handle start by taking the open loop end of the handle and slipping it through the o-ring at the top of the leash lead.

Step 2: Then slip the end of the leash lead with the swivel snap through the handle loop that was pushed through the single ring.

Step 3: Pull the leash lead all the way through to the end then pull the handle and leash lead snugly into place to secure the handle to the leash lead.

To remove or change the Mantle Handle simply reverse the process.

Step 1: To attach the Mantle Handle to the Mantle Leash Lead start by taking the open loop end of the handle and slipping it through the o-ring at the top of the leash lead.

Step 2: Then slip the end of the leash lead with the swivel snap through the handle loop that was pushed through the single ring.

Step 3: Pull the leash lead all the way through to the end then pull the handle and leash lead snugly into place to secure the handle to the leash lead.

To remove or change the Mantle Handle simply reverse the process.